[Originally posted on ccielab.ro]

Cisco IOS’s shell is a popular interface for devices in the networking world. But also in the network world, there are a lot of Linux/Open Source fans. The Quagga open source project tries to bring together IOS and Linux, by providing an IOS-like interface for configuring Linux’s interfaces, routing table and firewall, along side its own implementations of RIP, OSPF and BGP daemons.

The Quagga Software Routing Suite comes as a set of daemos. The main one is the zerbra daemon (Zebra is the old name of the project). This core daemon does the interaction with the Linux kernel and, also, with other daemons like ripd (RIP daemon), ospfd (OSPF daemon), bgpd (BGP daoemon). Quagga is modular, so you can implement new protocols if needed via a standard API.

To configure Quagga, you first need to start the daemons (at least the core one), in the /etc/quagga/daemons file. Each daemon has its own configuration file (ex. /etc/quagga/zebra.conf, /etc/quagga/ripd.conf etc.). Accessing the IOS-like shell is done via the vtysh command. Once in this shell, most commands available in Cisco’s IOS are available.

Router / # cd
Router ~ # vtysh

Hello, this is Quagga (version 0.99.18).
Copyright 1996-2005 Kunihiro Ishiguro, et al.

Router# conf t
Router(config)# hostname  LinuxRouter
LinuxRouter(config)# exit
LinuxRouter# show ?
bgp             BGP information
clns            clns network information
daemons         Show list of running daemons
debugging       State of each debugging option

[...]

Keep in mind that some things are not 100% identical to a Cisco router (ex. the interface names). Here’s an example of how to configure an interface.

LinuxRouter# conf t
LinuxRouter(config)# interface  eth0
LinuxRouter(config-if)# ip address  141.85.42.1 ?
A.B.C.D/M  IP address (e.g. 10.0.0.1/8)
LinuxRouter(config-if)# ip address  141.85.42.1/24
LinuxRouter(config-if)# link-detect

Monitor output (show commands) are similar aside some Linux specific details (ex. Kernel routes are available in Linux, but not in IOS).

Router# sh ip route
Codes: K – kernel route, C – connected, S – static, R – RIP, O – OSPF,
I – ISIS, B – BGP, > – selected route, * – FIB route

K * 0.0.0.0/0 via 192.0.2.1, venet0 inactive
O 10.10.12.0/24 [110/10] is directly connected, eth0, 00:03:41
C>* 10.10.12.0/24 is directly connected, eth0
O 10.10.14.0/24 [110/10] is directly connected, eth1, 00:03:36
C>* 10.10.14.0/24 is directly connected, eth1
O>* 10.10.23.0/24 [110/20] via 10.10.12.2, eth0, 00:02:46
O>* 10.10.24.0/24 [110/20] via 10.10.12.2, eth0, 00:02:14
*via 10.10.14.4, eth1, 00:02:14
O>* 10.10.25.0/24 [110/20] via 10.10.12.2, eth0, 00:02:41
O>* 10.10.35.0/24 [110/30] via 10.10.12.2, eth0, 00:01:21
* via 10.10.14.4, eth1, 00:01:21
O>* 10.10.45.0/24 [110/20] via 10.10.14.4, eth1, 00:02:08
C>* 127.0.0.0/8 is directly connected, lo
C>* 127.0.0.1/32 is directly connected, venet0
C>* 172.10.10.0/32 is directly connected, venet0
K>* 192.0.2.1/32 is directly connected, venet0

Configuring a routing protocol instance is also similar:

LinuxRouter# conf t
LinuxRouter(config)# router ospf
LinuxRouter(config-router)# network  192.168.123.0/0 area 0

As you can see, coming from an IOS background, this tool is very easy to use on your Linux box. It is far from perfect since it doesn’t have the years in production like IOS or iproute2, but it is cool to test out.